My ring doesn't fit anymore!
"My ring doesn't fit anymore. Can you help me?" Well its funny you asked, because I was just in the process of writing a blog about that very subject! After sizing thousands of rings over the course of 40 plus years I've developed a method. Here it is. First the rings are inspected for loose stones and any worn prongs. Certain stones such as emeralds, pearls, tanzanite, opal, and generally anything green can't take the heat required to size a ring. They have to be removed or protected first. Diamonds can take great heat but have to be cleaned thoroughly to remove soap and other grunge or it can get baked on the back of them in the next process.. Here I am cleaning diamonds with a steam cleaner. In the next process I heat the shank or bottom of the ring. This will reveal any previous sizing seams. I usually remove the old section of sizing stock and replace it with one larger one, to prevent the ring from having more than one set of seams, which would weaken it. T